Inventor Sheetmetal Corner Seams (A Quick Tip)
Mike’s got a quick Inventor Sheetmetal tip utilizing the Corner Seams where is uses it to “prep” two edges to apply a bend
Read Moreby Michael Thomas | Aug 17, 2016 | Autodesk, Inventor | 0
Mike’s got a quick Inventor Sheetmetal tip utilizing the Corner Seams where is uses it to “prep” two edges to apply a bend
Read Moreby Michael Thomas | Dec 1, 2015 | Autodesk, Inventor | 3
In this last article on our “deep dive” series on Inventor sheet metal, Mike dives in to look at the underlying “recipe” on which the sheet metal environment is based.
Read Moreby Michael Thomas | Nov 24, 2015 | Autodesk, Inventor | 1
In this post, Mike explores the many tools Autodesk Inventor includes for properly detailing your sheet metal models and their flat patterns.
Read Moreby Michael Thomas | Nov 17, 2015 | Inventor, New Post | 1
Mike is nearing the end to his series on Autodesk Inventor’s Sheet Metal environment. In this article he explores converting a part model into a fully functioning sheet metal model.
Read Moreby Michael Thomas | Oct 16, 2015 | Inventor, New Post | 2
Just like the classic 80’s movie the Karate Kid, Inventor’s Sheet Metal environment is full of heart and determination. In this go-round, Mike explores using Unfold to reveal the flat pattern in your sheet metal models, making changes, and applying the changes back to the folded model when you refold the bends.
Read Moreby Michael Thomas | Sep 23, 2015 | Autodesk, Inventor | 0
Continuing his “deep dive” into Inventor’s Sheet Metal tools, Mike is back with a look at an underutilized tool… Contour Rolls
Read Moreby Michael Thomas | Sep 21, 2015 | Inventor, New Post | 0
Mike looks at how to use the Corner Seam feature within the Inventor Sheet Metal Environment
Read Moreby Michael Thomas | Sep 14, 2015 | Inventor, New Post | 1
A key member of the Justice League was the Black Canary. At first glance she might seem a weak...
Read Moreby Michael Thomas | Sep 10, 2015 | Autodesk, Inventor, New Post | 0
Are Lofted Flanges really the most impressive feature in the Inventor Sheet Metal toolset? Mike guest blogs on Mechanical Advantage to show you why
Read Moreby Michael Thomas | Sep 7, 2015 | Inventor | 0
Continuing with his deep dive into features within the Sheet Metal Environment within Inventor Mike is “hemming” it up with Inventor Hems
Read Moreby Michael Thomas | Sep 2, 2015 | Inventor, New Post | 0
What do the Inventor Sheet Metal Corner Round, Corner Chamfer, and Cut features have in common? You’ll need to read and find out
Read Moreby Michael Thomas | Aug 3, 2015 | Inventor, New Post | 0
When working in sheet metal it’s often advantageous to work with the side profile and “construct” the model by extruding the profile. See how to build sheet metal models using Inventor’s Contour Flange feature.
Read More