A Window into Autodesk Fusion 360's Near Future

Just a quick one today. I recently came across these videos showing off potential implementations of simulation and design accelerators in Autodesk Fusion 360. There’s some pretty cool stuff in them, so I thought I would share them with our readers and offer some comments on each one. I’ll get the ball rolling with simulation.

Optimization

Now that is a pretty sweet pre-design, proof of concept tool! However, the downside is the potential precedent they could set for unconscious incompetence. These kinds of early stage “monkey see, monkey do” analysis tools are pretty compelling, especially if they are used during the bidding stages to win jobs or at least allowing you to write off poor design ideas and zero in on the better of the bunch. But they certainly are not suitable replacements for grown up simulation and real world product testing. Is this something you would use?

Too Hot To Drop

I’m no simulation expert, but drop tests from what I understand are safe enough to make ‘fool-proof’ in this way. For the most part there is no need to over-complicate the issue with high-end simulation tools. In this case here though, I would imagine the limitations would come in when your model becomes too complex for it. But again, this should probably only be used during the early stages of the design process.

Gearing Up

Seeing these types of tools appearing in Fusion 360 is giving me the willies. As a faithful Inventor user that is. It’s nice they are being put into the product, but it does increasingly make me wonder when the cross over between the two products becomes great, what will happen? Fusion 360 is just such great value for money. The Gear Feature shown at the end is badass! It means you can focus on your design in a simplified cylindrical and/or conical way, then scoot around adding Gear Feature’s when you’re hot to trot. Lovely! It’s that kind of stuff that makes Fusion 360 scary for Inventor… but then again. Just look at T-Splines. The Inventor development team now have some excellent internal competition to keep them on their toes, but also a great reference to step back, admire, pole around in and learn from.

Driving Me Nuts

I’ve recently been mucking about a bit with SolidWorks as a result of supporting HSMWorks during my day job. One of the things those two products together do very, very well, is holes. The SolidWorks Hole Wizard combined with the HSMWorks Drill Wizard is a sight to behold. It demos bloody well, but frankly it impresses because it’s a huge productivity tool and it WORKS! Well from the testing I have done it works, I have no doubt people can break it. This bolted connection tool in Fusion 360, looks to deal with some of the shortcomings found in Inventor’s hole tool, the most obvious of them is the ability for this tool to place a hole on a curved surface. I hope to see this turn into a really powerful hole & bolted connection tool, if it does, as I stated previously it should drive long overdue improvement of the Inventor Design Accelerator tools as well. Incidentally, if a SolidWorkesque Hole Wizard is something you would like to see in Inventor, I’ve created an Inventor Hole Wizard idea on the Ideastation you can vote for.